SubShield — Приватный ванильный сервер от участников MineShield
Сервер в своем большинстве ванилен. Мы держим баланс оптимизации/интереса/ваниллы, чтобы и сервер меньше лагал, и интересные фичи были, и ванильность не убивать.
Порталы, миры и уменьшенный спавнрейт? — издержки оптимизации;
Арморстенды, невидимые рамки? — небольшая деталь, почти не влияющая не игру, но позволяющая огромным количеством способов разнообразить постройки игроков;
Не работают некоторые фермы? — каждая версия игры подбрасывает новые сюрпризы оптимизации. Для того чтобы создать условия для игры сотен игроков, разработчики серверных ядер ограничивают работу некоторых ферм. Так же администрация старается следить за размером некоторых ферм, для того, чтобы они не влияли на стабильность сервера.
МиниИгры? — это вообще отдельная часть проекта, к основному выживанию никакого отношения не имеет;
Геймплей на серверах выживания абсолютно ванильный, в его механики мы не вмешиваемся.
Остались вопросы?
Не нашли ответ на Ваш вопрос? Вы можете задать его в Дискорде, в канале #support, поискать остальные ответы на странице Базы знаний
Cервер Майнкрафт sunshield.tk
Топ пять серверов Майнкрафт, который отображается на каждой странице сайта. Голосуйте за сервер или покупайте премиум баллы для того чтобы попасть в топ 5 Майнкрафт серверов!
- Основной режим игры: Анархия
- Версия игры: 1.20.1
- Топ 1
- 111
- Анархия
- 1.20.1
- Основной режим игры: Выживание
- Версия игры: 1.8-1.20.2
- Топ 2
- 50
- Выживание
- 1.8-1.20.2
- Обновление
- Основной режим игры: Выживание
- Версия игры: 1.19-1.20
- Топ 3
- 40
- Выживание
- 1.19-1.20
- Основной режим игры: Выживание
- Версия игры: 1.8-1.19.2
- Топ 4
- 31
- Выживание
- 1.8-1.19.2
- Вайп
- Основной режим игры: DayZ
- Топ 5
- 30
- DayZ
Игровые Майнкрафт сервера
Сервис Minecraft-Status.Ru поможет проверить Майнкрафт сервер на доступность, узнать сколько игроков находится на сервер, а также подскажет слабые стороны оформления и безопасности.
Помимо этого сайт поможет подобрать идеальный режим игры или мини-игру нужной версии и с определенным событием. Minecraft-Status.Ru поможет реально подобрать лучший сервер Майнкрафт по вашим параметрам!
Этот сайт не связан с официальными лицами, а все бренды и товарные знаки упомянутые на сайте принадлежат их авторам.
The sunshield separates the observatory into a warm, sun-facing side (thermal models show the max temperature of the outermost layer is 383K or approximately 230 degrees F), and a cold side (with the coldest layer having a modeled minimum temp of 36K or around -394 degrees F). The five-layer sunshield keeps sunlight from interfering with the sensitive telescope instruments. The telescope operates under 50K (
-370F) Photo: Northrop Grumman
Keeping It Cool
The James Webb Space Telescope observes primarily the infrared light from faint and very distant objects. In order to be able to detect those faint heat signals, the telescope itself must be kept extremely cold. To protect the telescope from external sources of light and heat (like the Sun, Earth, and Moon) as well as from heat emitted by the observatory itself, Webb has a 5-layer, tennis court-sized sunshield that acts like a parasol providing shade. [Actual dimensions: 21.197 m x 14.162 m (69.5 ft x 46.5 ft)]
This sunshield is always between the Sun/Earth/Moon and the telescope. It’s able to be positioned this way because JWST is orbiting the Sun 1.5 million kilometers away from (but approximately in line with) the Earth.
Location
The sunshield protects the telescope from external sources of light and heat (like the Sun, Earth, and Moon).
Position
Webb’s sunshield is positioned between the Sun/Earth/Moon and the telescope. Webb’s orbit at L2 ( more about Webb’s orbit ). Image: STScI
The sunshield allows the telescope to cool down to a temperature below 50 Kelvin (-370°F, or -223°C) by passively radiating its heat into space. The near-infrared instruments (NIRCam, NIRSpec, FGS/NIRISS) work at about 39 K (-389°F, -234°C) through a passive cooling system. The mid-infrared instrument (MIRI) works at a temperature of 7 K (-447°F, -266°C), using a helium refrigerator, or cryocooler system.
In addition to providing a cold environment, the sunshield provides a thermally stable environment. This is essential to maintaining proper alignment of the primary mirror segments as the telescope changes its orientation to the Sun.
Why Five Layers
Why does the sunshield have five layers instead of just a single thick one? Each successive layer of the sunshield is cooler than the one below. The heat radiates out from between the layers, and the vacuum between the layers is a very good insulator. One big thick sunshield would conduct the heat from the bottom to the top more than five layers separated by vacuum.
The sunshield is made of a lightweight material with special thermal properties, called Kapton, which is also specially coated.
The layers work together to reduce the temperatures between the hot and cold sides of the observatory by approximately 570 degrees Fahrenheit. Each successive layer of the sunshield, made of kapton, is cooler than the one below. The fifth and final layer was delivered on Sept. 29, 2016 to Northrop Grumman Corporation’s Space Park facility in Redondo Beach. Photo: Northrop Grumman
In Depth
The shiny silver material of the five-layer sunshield is a complex and innovative feat of material science and engineering. Each layer is made from a unique composite material, each has a specific thickness and size, and they must be precisely separated in space. There are even special seams and reinforcements to limit meteorite damage.
NASA and its industry partners developed a lightweight, robust way to protect the telescope and mirrors from the sun’s infrared radiation in the material that makes up the sunshield. Some of the things that make the sunshield unique are its strong yet ultra-thin material, special kite-like shape, and the special role of its layers.
Material Make-up
The sunshield consists of five layers of a material called Kapton. Each layer is coated with aluminum, and the sun-facing side of the two hottest layers (designated Layer 1 and Layer 2) also have a «doped-silicon» (or treated silicon) coating to reflect the sun’s heat back into space. The sunshield is a critical part of the Webb telescope because the infrared cameras and instruments aboard must be kept very cold and out of the sun’s heat and light to function properly.
Kapton is a polyimide film that was developed by DuPont in the late 1960s. It has high heat-resistance and remains stable across a wide range of temperatures from minus 269 to plus 400 Celsius (minus 452 to plus 752 degrees Fahrenheit). It does not melt or burn at the highest of these temperatures. On Earth, Kapton polyimide film can be used in a variety of electrical and electronic insulation applications.
The sunshield layers are also coated with aluminum and doped-silicon for their optical properties and longevity in the space environment. Doping is a process where a small amount of another material is mixed in during the Silicon coating process so that the coating is electrically conductive. The coating needs to be electrically conductive so that the Membranes can be electrically grounded to the rest of JWST and not build up a static electric charge across their surface. Silicon has a high emissivity, which means it emits the most heat and light and acts to block the sun’s heat from reaching the infrared instruments that are located underneath it. The highly-reflective aluminum surfaces also bounce the remaining energy out of the gaps at the sunshield layer’s edges.
Post-deployment of a full-sized test sunshield. Photo: Northrop Grumman
Kite-Like Shape and Layers
The kite-like shape and the number of layers of sunshield both play an important role on the telescope. Each of the different layers are positioned and separated with precision to accomplish their function.
«The shape and design also direct heat out the sides, around the perimeter, between the layers,» said James Cooper, James Webb Space Telescope Sunshield Manager at NASA’s Goddard Space Flight Center, Greenbelt, Maryland. «Heat generated by the Spacecraft bus at the “core,” or center, is forced out between the membrane layers so that it cannot heat up the optics.»
«The five layers are needed to block and re-direct enough heat to get the telescope down to required temperatures, with margin,» Cooper said. «The fifth layer is mostly for margin against imperfections, micro-meteoroids holes, etc.» The gap between the layers provides an additional insulating effect.
Each layer of the sunshield is incredibly thin. Layer 1 faces the sun and is only 0.05 millimeters (0.002 inches) thick, while the other four layers are 0.025 mm (0.001 inches). The thickness of the aluminum and silicon coatings are even smaller. The silicon coating is
50 nanometers (nm) (1.9 microinches) thick, while the aluminum coating is
100 nm (3.93 microinches) thick.
The layers are slightly different sizes and different shapes. Layer 5 (just under the primary mirror) is smallest and Layer 1 is largest. Layer 1 is relatively flat and layer 5 is more curved. The layers are closer together at center and further apart at the edges to direct heat from center to the outside of the layers. In general, the layers are as close as an inch or two to each other at the center and around 10″ apart from each other at the edges.
Thermal models show that the max temperature of Layer 1 is 383K. The max temperature of Layer 5 is 221K, and its minimum temperature is a chilly 36K.
The telescope optics (like the infrared camera and mirrors) must always be protected from direct exposure to any hot objects. So the membranes are sized and positioned such that the mirrors only have a direct line of sight to the cold Layer 5, while the sun only directly shines on Layer 1 no matter which way the observatory is pointed.
A piece of Kapton showing ripstop seaming. Credit: NASA
Special Seaming
The membrane material is tough, but if it gets a small tear or hole, the hole could become much larger. So, there is a special process called a Thermal Spot Bond (TSB) — areas where each layer are melted together. In addition, reinforcing strips of membrane material are Thermal Spot Bonded to the parent membrane about every 6 feet or so, forming a grid pattern of «rip-stops.»
«This has been shown through testing to arrest a tear and keep it from extending outside of a given grid area,» said Cooper. So, if a hole occurs in a layer of the sunshield from a meteoroid, or small meteor, the size of the damage is limited. These are not intended to stop a meteoroid, but rather to contain the area of damage.
Extreme Temperatures and the Sunshield
The material of the sunshield does shrink as it gets colder, and the hot layers expand. Cooper said, «The Kapton variety minimizes this compared to some other material choices. We have tested the material so we know how much it shrinks. We account for this in both our manufacturing and in our analysis predictions of the shape we will get in space. We have also tested a one-third-scale five-layer sunshield at temperature and vacuum to verify our predictions.»
Below is a video showing sunshield deployment tests.
The below video shows construction of special structures on the sunshield that shape it to best reflect heat.
Как попасть на sunshield
SubShield Server Новости Открытие энда сервер Майнкрафт
Внимание: Ответ на вопрос «какой пароль», читайте в этом FAQ: Как заходить и регистрироваться на серверах Майнкрафт.
В комментариях запрещены: пиар серверов, мат и оскорбления. Наказание – пожизненный бан.
Продвинь свой сервер «SubShield Server Новости Открытие энда» в ТОП мониторинга, используя кнопки голосования на сайте сервера или сайте покупки доната. Также мы рекомендуем вам установить на сайт красивый виджет мониторинга онлайна сервера.
Кнопка голосования за сервер:
Кнопка голосования за сервер альтернативная:
Получить код
Виджет «Мы на MinecraftRating.ru»:
Получить код
Виджет «Проверено MinecraftRating.ru»:
Получить код
Cервер Майнкрафт sunshield.aternos.me
Топ пять серверов Майнкрафт, который отображается на каждой странице сайта. Голосуйте за сервер или покупайте премиум баллы для того чтобы попасть в топ 5 Майнкрафт серверов!
- Версия игры: 1.8-1.19
- Топ 1
- 70
- 1.8-1.19
- Основной режим игры: Выживание
- Топ 2
- 63
- Выживание
- Обновление
- Основной режим игры: БедВарс
- Версия игры: 1.8-1.20.1
- Топ 3
- 52
- БедВарс
- 1.8-1.20.1
- Основной режим игры: Выживание
- Версия игры: 1.16-1.20
- Топ 4
- 50
- Выживание
- 1.16-1.20
- Версия игры: 1.20.1
- Топ 5
- 40
- 1.20.1
Игровые Майнкрафт сервера
Сервис Minecraft-Status.Ru поможет проверить Майнкрафт сервер на доступность, узнать сколько игроков находится на сервер, а также подскажет слабые стороны оформления и безопасности.
Помимо этого сайт поможет подобрать идеальный режим игры или мини-игру нужной версии и с определенным событием. Minecraft-Status.Ru поможет реально подобрать лучший сервер Майнкрафт по вашим параметрам!
Этот сайт не связан с официальными лицами, а все бренды и товарные знаки упомянутые на сайте принадлежат их авторам.
SubShield — Приватный ванильный сервер от участников MineShield
Сервер в своем большинстве ванилен. Мы держим баланс оптимизации/интереса/ваниллы, чтобы и сервер меньше лагал, и интересные фичи были, и ванильность не убивать.
Порталы, миры и уменьшенный спавнрейт? — издержки оптимизации;
Арморстенды, невидимые рамки? — небольшая деталь, почти не влияющая не игру, но позволяющая огромным количеством способов разнообразить постройки игроков;
Не работают некоторые фермы? — каждая версия игры подбрасывает новые сюрпризы оптимизации. Для того чтобы создать условия для игры сотен игроков, разработчики серверных ядер ограничивают работу некоторых ферм. Так же администрация старается следить за размером некоторых ферм, для того, чтобы они не влияли на стабильность сервера.
МиниИгры? — это вообще отдельная часть проекта, к основному выживанию никакого отношения не имеет;
Геймплей на серверах выживания абсолютно ванильный, в его механики мы не вмешиваемся.
Остались вопросы?
Не нашли ответ на Ваш вопрос? Вы можете задать его в Дискорде, в канале #support, поискать остальные ответы на странице Базы знаний
Техническое руководство системы SUNSHIELD
Представленная в данном руководстве система обладает уникальными возможностями для защиты помещений от прямых солнечных лучей с возможностью регулировки интенсивности светового потока.
Данная система изготавливается под любые нестандартные проемы и устанавливается как в вертикальной, так и горизонтальной плоскости под любым углом наклона.
Система SUNSHIELD устанавливается как внутри помещения, так и на улице. Установка системы с улицы является самым эффективным методом понижения температуры внутри помещения.
Поворот ламелей осуществляется двумя способами:
- Изделия, установленные внутри помещения, управляются двигателем от пульта дистанционного управления или от стенового переключателя, а также механически от съемной ручки (коловорот).
- Изделия, установленные с улицы, управляются только двигателем (220 w) от пульта дистанционного управления или стенового переключателя.
Площадь изделия изготавливается до 36 м2 и управляется одним двигателем.
В полотне изделия данной системы можно использовать различные виды ламелей.