MYSQLPREACHER
“Queued seed” means the torrent job is waiting for another torrent job to finish seeding before starting.
What seeds means in torrent?
Seeding means sharing a file(s) with other peers. After a torrent job finishes downloading, if you leave the torrent job seeding, it uploads the file(s) to other peers so they can enjoy them too.
Is seeding on uTorrent bad?
Never stop seeding on torrent, seed as much as possible. you can stop it when there are many seeders on that torrent but when there are less seeders you should seed.
What does queued mean in FOLX?
Queueing downloads Folx allows setting the number of downloads processed at a time. This number can vary from 1 to 10.
Does seeding use data?
Does seeding use a lot of data? Yes, seeding on torrent consumes data. This means that whenever you download files from torrent, some other user from any part of the world is uploading that very file at the same time at which you are downloading it.
How do you know when a torrent is seeding?
uTorrent will ping loudly to inform the user the file is downloaded. It will also create a pop-up in the right-hand corner of the screen to confirm this. If one looks at the dashboard it will have changed to a bright light green colour. The timer will also be replaced with a column saying “seeding’.
How much data does seeding consume?
Seeding uses your upload bandwitdth, not download, so it should have no impact on your download speeds.
What does Black FOLX mean?
: folks —used especially to explicitly signal the inclusion of groups commonly marginalized Having women teach other women matters. Women of color. Transgender women.
What does seeding mean in FOLX?
When seeding, you distribute the torrent file, thus making it possible for other people to download it. In fact, you are already seeding while downloading, but it’s more helpful to continue distributing the full torrent file after you have finished downloading it.
Настройка uTorrent — Queueing
Настройка количества одновременных загрузок, приоритетов и ограничений скоростей.
Queue Settings (Настройка очередности) — настройка количества активных торрентов.
- Maximum number of active torrents (upload or download): (Максимум активных торрентов (раздач и загрузок):) — устанавливает максимальное количество активных, одновременных задач, на загрузку или раздачу.
- Maximum number of active downloads: (Максиму одновременных загрузок:) — устанавливает количество одновременных, активных загрузок, добавленных в список.
Seed While [Default Values] (Раздавать до: (По умолчанию: 150% и «Игнорировать»)) — определение условий раздачи, завершение по достижению определенного процента отданного к скачанному или времени.
- Ratio is: <= Number % (Коэфф. <= Число %) — останавливает раздачу по достижению определенного процента в соотношении скачанного к розданному. 100% означает что вы раздадите ровно столько, сколько скачали, а 500% значит что вы раздадите в 5 раз больше скачанного. Значение «0» означает, что этот параметр будет игнорироваться, и учет будет вестись только по времени. А значение параметра равное «-1» означает режим бесконечного сидирования. Если ограничение по времени включено, то раздача завершиться только при достижении обоих лимитов.
- Seeding time is: <= (min) Number (Время раздачи: <= (мин) Число) — устанавливает ограничение по времени, при достижении которого раздачи будут останавливаться. Если ограничение в процентах включено, то раздача будет заканчиваться только тогда, когда необходимый процент набран и время закончилось. Время указывается в минутах.
- Seeding tasks have higher priority than downloading tasks (Раздачи имеют более высокий приоритет, чем загрузки) — uTorrent устанавливает больший приоритет раздачам, чем загрузкам. То есть, если максимальное количество активных торрентов достигнуто, а в ваше списке присутствуют раздачи, то загрузки не будут начинаться, пока не освободится свободное место после завершенных раздач.
When uTorrent Reaches the Seeding Goal (При завершении раздачи торрента) — установка ограничений на скорость для раздаваемых торрентов.
Saved searches
Use saved searches to filter your results more quickly
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.
Seeding
Clone this wiki locally
Seeding is the act of uploading data to other peers from a completed download (of course you can/will upload data while downloading as well but this isn’t generally referred to as ‘seeding’)
In order to upload data to other peers there have to be other incomplete peers in the swarm (pretty obvious when you think about it).
That is, if there are no other incomplete peers then it is impossible to upload.
Likewise if there is one incomplete peer and 1000 seeds all trying to upload data to it you will find it hard to upload any data to it as it has the opportunity to grab data from the other 999 as well as you.
Another thing to note is that as a seeder you can’t force your data on another peer, the other peer has to request it. So even if you are connected to an incomplete peer it might well not bother requesting anything from you as it might be getting all it needs from other seeds.
One of the most often heard complaints from users is ‘why aren’t my seeds uploading?’ . Once you have read and understood the above you also need to understand the ‘seeding rules’ within BiglyBT.
The Seeding Rules are configured under Options->Queue and Options->Queue->Seeding.
In order to limit the resources consumed by BiglyBT it runs a limited number of active seeds (each active seed is consuming memory, cpu and network resources, even when not uploading). Seeds are ranked according to the various seeding options and sorted by this rank. The highest ranked seeds will be activated in preference to lower ranked ones.
Things considered when ranking a seed are, for example, the number of incomplete peers, the download’s share ratio and how long it has been actively seeding for.
Seeds that are not yet scheduled to become active will be shown as ‘Queued’
You can see the assigned seeding rank by hovering your mouse over the ‘Status’ column or enabling the ‘Seeding Rank’ column by right-clicking on the table header and selecting ‘column setup’
Increasing Seeding Speeds
If you are connected to lots of incomplete peers and yet you are uploading slowly you might want to increase the number of «upload slots» per torrent, either globally (under Options->Transfer) or on a per-torrent basis via the torrent’s options. The BitTorrent protocol limits the number of peers that can be uploaded to at any given time in order to avoid uploading to lots of peers but individually at a slow speed. This is because for overall swarm speed it is important to transfer pieces (chunks of the files) quickly to other peers as they can’t start redistributing the data until the entire piece has been received.
It is also worth trying to ensure that you are not «firewalled», or have «NAT issues». This is when your network setup is not allowing remote peers to connect to you. This can affect seeding as it potentially reduces the peers that you are connected to, particularly when a new peer joins the swarm and is actively seeking out peers to download from. If they can’t connect to you then you risk the chance of missing the initial opportunity to upload to the peer. By the time you find the peer (e.g. from a regular, periodic tracker announce) then that peer may have completed downloading or already be connected to fast peers. There is a tester to check your incoming connection status under Help->NAT/Firewall test.
Also check your number of active seeds (in a Seeding state as opposed to Queued). If you generally have torrents with very few peers then by default they will end up Queued to save resources. They will show «0 peers» in their seeding status. Queued torrents will become active when peers are noticed, e.g. when a tracker «scrape» occurs. This check can be fairly infrequent so it may take some time to notice a peer. You can disable the «queue when 0 peers» by configuring Queue->Seeding->Ignore Rules and Queue->Seeding->First Priority as needed. You may also want to configure the maximum active torrents under the Queue rules to control how many torrents are permitted to enter an active Seeding state.
Why are my seeds in a Queued state?
Diagnosing Slow Uploading
There are various things to look at to determine the health of your client. In the Peers View there are some columns of interest. The «Choking» column shows whether the peer has been allocated an upload slot. If you are choking a peer then it can’t be uploaded to as it can’t make requests for data. Another column is «In Requests». For an unchoked peer this shows the number of requests that the peer has made to you for data. Each request corresponds to 16KB of data by default. Slow peers will have a small number of requests queued, fast ones a lot more.
In the Statistics view there is a «Transfers» tab. On the right there is a graph of the amount of upload data queued. If there is a lot of data queued but your client isn’t uploaded very fast then this might indicate a general network problem, for example a saturated router.
Light Seeds
These were introduced in BiglyBT 2.7 and are designed to help with the specific case of private trackers that track the amount of time that a torrent is actively seeding regardless of whether actually uploading or not. In many cases such trackers have an abundance of seeds and very few incomplete peers. Under pre-2.7 circumstances this would leave your seeds in a ‘queued’ state reporting ‘0 peers’ as the reason. Light Seeding addresses this by placing such seeds into an active state while using the absolute minimum of resources.
Light-seeding can be enabled overall via Options->Queue->Seeding settings. It can also be enabled/disabled on a per-tracker basis by using the View->All Trackers view — there is a right-click opion to do so.
Debug
If you are unsure as to how a particular seeding rank is being arrived at then you can enable debug information under
The ‘Seeding Rank’ column tooltip will be augmented with useful information.
Note that this option does use quite a bit of resource so disable it when not required.